GF98.00-P-4040SY Overview of Fillers

GF98.00-P-4040SY Overview Of Fillers

Material:
Water-based

Processing method:
ESTA (electrostatic high-speed rotation atomization)

Coat thickness:
27 microm (-3/+8 microm)

Stoving conditions:
5 min at 70 °C (water removal)
10 min at 150 °C (cross-linking)

Function:
UV block for electrophoretic immersion paint (KTL) and covering the substrate for good top coat appearance. Guarantees/enhances the good technical-mechanical properties of the overall paintwork structure.

Use of different filler colors (anthracite, silver gray and optionally white), coordinated with the top coat color, further reduces the visibility/conspicuousness of stone marks.