Telematics Sys. - Activation/Deactivation Of SPLITVIEW

Date January 3, 2012

Order No: P-B-82.85/693h

Supersedes P-B-82.85/693g; September 2011

Group: 82

Revision History

Revision Date Purpose

h 01/01/12 Illinois added to states allowing SPLITVIEW

g 09/22/11 Alabama added to states allowing SPLITVIEW

f 08/23/11 Louisiana added to states allowing SPLITVIEW

e 07/22/11 Washington added to states allowing SPLIIVIEW

d 07/01/11 Virginia added to states allowing SPLITVIEW

05/11/11 Vermont added to states allowing SPLITVIEW

C 06/16/11 New Hampshire added to states allowing SPLITVIEW.

b 10/6/10 Maryland added to states allowing SPLITVIEW.

a 7/29/10 Arizona added to states allowing SPLITVIEW.

- 1/10 Initial issue

SUBJECT: As of MY 2010 with NTG 3.5 Telematics Systems, Models 216 and 221

SPLITVIEW Activation/Deactivation

Due to various state laws, SPLITVIEW is currently only allowed in certain states. As of January 1, 2012, the state of Illinois now allows SPLITVIEW.

All Vehicles equipped with SPLITVIEW will arrive with this feature de-activated from the factory. Activation can only occur as outlined in LI82.85-P-048667.





This feature is currently prohibited on vehicles registered in, or functioning on vehicles while traveling through the following 5 states:





To activate SPLITVIEW, connect SDS to the vehicle and ONLY activate after first confirming whether your state prohibited this technology by acknowledging your compliance.

The Dealer is responsible and will be held accountable for ensuring proper activation; or deactivation, if a vehicle with SPLITVIEW that has been previously activated needs to be deactivated before retailed in a prohibited state.