AN54.65-P-0030-02SY Retrofit Camera

AN54.65-P-0030-02SY Retrofit Camera







1. Take out hazard warning triangle (4) and remove holder (5).
2. Remove paneling (3).
3. Remove left and right hinge bracket trim piece (7).
4. Remove trim of trunk lid (8).
5. Remove bolts (9) from trunk lid switch group (S88).
6. Unclip clips (10) securing cover (11) starting from right. Detach adhesive pad (14) and remove cover (11) from trunk lid (6).
The cover (11) is no longer required.







7. Remove plug (18) from trunk lid (6).
The plug (18) is no longer required.

8. Guide black 4-pin connector (19) and line (20) of reversing camera (B84/3) from outside into cutout in trunk lid (6) and clip reversing camera (B84/3) into trunk lid (6) as shown in picture.
Later, connect the black 4-pin connector (19) in the trunk lid (6) to the reversing camera wiring harness.