GF54.30-P-0002-05CA Instrument Cluster (IC), Operating Information

GF54.30-P-0002-05CA Instrument Cluster (IC), Operating Information

Operating instructions
Via the left multifunction steering wheel button group (S110) and right multifunction steering wheel button group (S111) various menu levels can be shown in the multifunction display (A1p13) of the IC (A1):
- The system selection button (S110s3) can be used to scroll through the vehicle menus.
- It is possible to scroll within a menu in the submenus (S110s1) or in lists using the scroll forward and back button.
- The "Back" and voice control system off (S110s4) button can be used in each menu or submenu to jump into the next higher menu level.
- Using the OK button (S110s6) enables each selection or a pending message to be confirmed.

All the buttons of the multifunction steering wheel button group are always installed. Activation of the corresponding functions however depends on the equipment installed in the vehicle.

Overview of available menus (equipment-dependent):
^ "Trip" menu
^ "Navi" menu
^ "Audio" menu
^ Tel menu
^ Assist menu
^ "Service" menu
^ Set up menu

In the "Light" submenu of the "Adjustment menu" on vehicles with code (621) ILS (left-hand traffic) or with code (622) ILS (right hand traffic) the "Tourist function" menu item has been added as of 1.12.09. Here low beams can be adapted for left and right hand traffic.

"Trip" menu
The following functions can be selected in the "Trip" menu:
- Show standard display or reset trip odometer
- Show or reset trip computer "After start"
- Show or reset trip computer "After reset"
- Show range and current consumption indicator
- Show digital speedometer
- Show digital speedometer with gearshift recommendation (with transmission 711, 716)

"Navi" menu
Navigation notes are displayed in the "Navi" menu when the function is switched on.
When the function is switched off the direction of travel is shown with cardinal points (e.g. "NW direction of travel").

"Audio" menu
The following functions can be selected in the "Audio" menu:
- Select radio station
- Operate CD player/CD changer/DVD changer/DVD audio/MP3
- Operate DVD video
- Operate TV

Telephone (tel) menu
The name of the selected mobile telephone network is shown in the tel menu when the function is switched on. It is still possible then to scroll through the stored telephone book and select an entry. When the function is switched off the text "Telephone Off" is displayed.

Assist menu
The following functions can be selected in the assist menu, depending on the equipment installed:
- Switch "ESP" active or passive (model 207.3 as of 1.6.10, model 207.4)
- Switch "Speed Limit" on or off (with code (513) Speed Limit Assist)
- Show distance chart (with code (233) DISTRONIC PLUS)
- Switch on/off "PreSafe brakes"
- Switch on/off "Attention Asst."
- Switch "Blind Spot Asst." on or off (with code (234) Blind Spot Assist)

"Service" menu
The following functions can be selected in the service menu:
- Retrieve display messages
- Tire pressure loss warner (without code (475) Tire pressure monitor (Premium)) or tire pressure monitor (with code (475) tire pressure monitor (Premium))
- Service interval indicator "ASSYST PLUS"

Set up menu
Changes to the following settings can be made in the set up menu:
- Instrument cluster
- Lights
- Vehicle
- Comfort
- Manufacturer default setting
- Date/Time (without code (511) Audio 50 APS incl. DVD changer or without code (525) MB Audio 50 APS radio or without code (512) COMAND APS incl. DVD changer or without code (527) COMAND APS with single DVD drive (with navigation))

In the "vehicle" submenu of the "adjustment" menu on model 207.3 as of 1.6.10 and on model 207.4 the menu item "acoustic locking feedback" is added. Here the "acoustic locking feedback" can be switched on or off.