AR47.10-P-4100-02CW Open, Close Latch

AR47.10-P-4100-02CW Open, Close Latch

Fuel Tank:

1 Hammer back damping mat (1) or remove it.
2 Remove bolts (2a) and cover (2) for service opening.
Observe maximum bolt length of 10 mm. When using longer bolts there is the danger of leaks at the fuel tank and injury to persons or damage to equipment and the environment.
Installation: The impressed arrow on the cover (2) must point in the direction of travel.
Installation: Observe tightening torque [Nm].

3 Install in the reverse order.
Removal of the right cover takes place analog to the left cover (2).

Shown on the left cover