Convertible Top Latch Position Switch / Sensor: Service and Repair

AR77.39-P-3705QA Remove/Install Soft Top Bow Locked Limit Switch







DANGER!
Injury hazard from roll bar extending
- Before working in the area of the roll bar pull rear head restraints out by hand.

1 Partially open soft top

NOTE: Leave soft top compartment cover open and soft top bow set up.

2 Unclip cover frame (2) and remove.
3 Pull out clips (3).
4 Remove soft top compartment paneling (1).
5 Cut cable straps (4)
6 Pull fuse (5) out with soft top bow limit switch in catch position (S84/19)
7 Separate plug connection (6)
8 Install in reverse order