GF54.65-P-5030CAJ Reversing Camera Control Unit, Component Description

GF54.65-P-5030CAJ Reversing Camera Control Unit, Component Description
MODEL 207.3 /4
- with CODE (218) Backup camera
- with CODE (498) Japan version





Illustrated on model 207.3
N66/2 Backup camera control unit

Location
The reversing camera control unit is behind the rear bench seat in the trunk.

Task
The reversing camera control unit has the following tasks:
^ Reading in of signals
^ Evaluation of input factors
^ Actuation of components

Reading in of signals
The input factors are read in via the following connections:
^ Direct line
^ Interior CAN (CAN B)

Direct line
The following signal is read in via a direct line:
- Color Video Baseband Signal CVBS) signal of reversing camera (B84/3)

Interior CAN
The signals are read in by the reversing camera control unit over the interior CAN.
The functions that use these signals are described in the individual function descriptions (see block diagram or function schematic).

Evaluation of input factors
The input factors that have been read in are evaluated by the integrated microprocessor and the relevant components are then actuated.

Actuation of components
Components are actuated with the following line:
^ Direct line

Direct line
The following components are actuated via a direct line:
- Backup camera
- COMAND controller unit (A40/3) (CVBS signal)