P0368

The position sensor of the exhaust camshaft (cylinder bank 1) has a short circuit to positive.
Check component 'B6/4 (Left intake camshaft Hall sensor)'.


Test 1: Continue

1.

Test 1.1: Continue

1.1.

Test 1.1.1: Continue

1.1.1.
Check power supply of component 'B6/4 (Left intake camshaft Hall sensor)'.
Test procedure

- Switch off ignition.
- Detach plug from component 'B6/4 (Left intake camshaft Hall sensor)'.
- Measure direct voltage with multimeter between sockets [B6/4] 1 and [B6/4] 3
- Switch on ignition.

Measured values
Enter the measured voltage.







Check power supply of component 'B6/4 (Left intake camshaft Hall sensor)'.

- The power supply of component 'B6/4 (Left intake camshaft Hall sensor)' is OK.

Possible causes and remedies

- Signal line
- B6/4 (Left intake camshaft Hall sensor)

End of test



End of test
Result: Fail