P033385

Knock sensor 1 (cylinder bank 2) has a short circuit to positive. There is a signal above the permissible limit value.

Test 1: Continue

1.
Check component '{0}'.


Test 1.1: Continue

1.1.
Check component '{0}' by means of actual value.

- The actual values are not OK.

Possible causes and remedies

- Check electrical lines from component 'N3/10 (ME-SFI [ME] control unit)' to control unit '{1}'.
- A30/2 (Right cylinder bank rear knock sensor)

End of test


End of test
Result: Fail