P0119

Coolant temperature sensor 1 has a sporadic malfunction.
Check component 'B11/4 (Coolant temperature sensor)'.


Test 1: Continue

1.

Test 1.1: Continue

1.1.
Connection of socket box
Legend

- A - Connection of test cable of socket box (35-pin)
- 001 - Plug-in connectors of component 'N3/9 (CDI control unit)'
- 05 - Socket box (35-pin)
- 050 - Socket box (126-pin)
- 108 - Test cable 266 589 01 63 00
- N3/9 (CDI control unit)
- II 1-63 Connection of test cable
- III 64-126 Connection of test cable

Test procedure

- Connect socket box (35-pin) to control unit 'N3/9 (CDI control unit)'.
- Connect socket box (126-pin) to control unit 'N3/9 (CDI control unit)'.

Caution!

- Connection A of test cable 108 must NOT be connected to connection B of the 126-pin socket box.







Test 1.1.1: Continue

1.1.1.
Test signal line of component 'B11/4 (Coolant temperature sensor)'.

- The actual value is not OK.

Possible cause and remedy

- Check electrical line from component 'B11/4 (Coolant temperature sensor)' to component 'N3/10 (ME-SFI [ME] control unit)'.

End of test



End of test
Result: Fail