P007B28

The charge air temperature sensor (cylinder bank 1) has a malfunction. The signal offset is outside the permissible range.

Test 1: Continue

1.
Check component 'B17 (Intake air temperature sensor)'.


Test prerequisites

- Ignition OFF
- Only perform the test when the combustion engine is cold.

Note

- To obtain meaningful test results, the following test prerequisites must be satisfied.

Continue with button 'Continue'



Test 1.1: Continue

1.1.

Test 1.1.1: Continue

1.1.1.
The actual value is not OK.
Possible cause and remedy

- Check electrical lines from component 'B17 (Intake air temperature sensor)' to control unit 'N3/10 (ME-SFI [ME] control unit)' and repair or replace if necessary.

Note

- Erase the fault memory after the end of the test.

End of test



End of test
Result: Fail