E1959

One or more signals sent from control unit N47-5 (ESP control unit) via the CAN bus is implausible. Current symptom : The selector lever cannot be moved out of position "P".


Possible cause:

- N47-5 (ESP control unit)
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Fault in CAN communication with control unit N47-5 (ESP control unit).

1. Fault in CAN communication with control unit N47-5 (ESP control unit).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N47 (Traction systems control module)
Possible measures

- Read out fault memory of control unit N47 (Traction systems control module).
- Process displayed fault codes in control module N47 (Traction systems control module).
End of test