Manufacturer Code Charts: 1974

Selector lever position "P" was engaged due to a fault occurring in component A80 (Intelligent servo module for DIRECT SELECT) or in the vehicle communications.


Possible cause:

- Selector lever position
Affected functions:

- Drive position selection

-------------------------------------------------

Test 1: Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)'

1. Remedial action if control unit is faulty 'A80 (Intelligent servo module for DIRECT SELECT)'
Operation number of operation texts and work units or standard texts and flat rates:27-0641Possible cause

- Fault in component A80 (Intelligent servo module for DIRECT SELECT)
- Error in the vehicle communication
- Fault code 1974 might be a consequential fault of fault code 1904.
Test sequence

- Erase fault memory.
- Teach in component Y3/8s1 (Selection range sensor (VGS)).
- Once again read fault memory.
Continue with button "F2"

Warning!Communication with ECU required.