Manufacturer Code Charts: 1911

Faulty data in control unit of component A80 (Intelligent servo module for DIRECT SELECT)


Possible cause:

- A80 (Intelligent servo module for DIRECT SELECT)
Affected functions:

- Drive position selection

-------------------------------------------------

Test 1: Remedial action in the event of faulty data in control unit A80 (Intelligent servo module for DIRECT SELECT)

1. Remedial action in the event of faulty data in control unit A80 (Intelligent servo module for DIRECT SELECT)
Operation number of operation texts and work units or standard texts and flat rates:27-0641Test sequence

- Erase fault memory.
- Program control unit.
- Once again read fault memory.
Continue with button "F2"

Warning!Communication with ECU required.