EU113C00

The wheel speed signals were not received.


Possible cause:

- Check the CAN communication with control unit N30/4 (Electronic Stability Program control unit).
- Chassis CAN bus
Affected functions:

- Transmission mode selection
- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N30/4 (Electronic Stability Program control unit).

Test 2: Chassis CAN test

1. Check the CAN communication with control unit N30/4 (Electronic Stability Program control unit).

Test 1.1: Check the CAN communication with control unit N30/4 (Electronic Stability Program control unit).

1.1. Check the CAN communication with control unit N30/4 (Electronic Stability Program control unit).
Warning!Communication with ECU required.


2. Chassis CAN test
Warning!Communication with ECU required.