GF83.10-P-2192RC Multifunction Sensor, Component Description

GF83.10-P-2192RC Multifunction Sensor, Component Description
- with CODE (581) Comfort automatic air conditioning

Component Identification:

Location
The multifunction sensor is located below the battery (G1) in the engine compartment at the bottom right.

Task
The multifunction sensor records the following readings:
- Ambient temperature
- Air humidity
- Pollutant concentration of carbon monoxide (CO) and nitrogen oxides (NOX) of aspirated outside air

The multifunction sensor uses the ambient temperature and air humidity to calculate the dew point and transmits this data via the AC bus to the comfort AAC [KLA] control and operating unit (N22/7).

The dew point is needed to regulate the refrigerant compressor (A9).
The multifunction sensor is also used to record the concentration of CO and NO X pollutants.
The values are read in directly by the control and operating unit via the AC bus. The control and operating unit controls the automatic recirculation according to the read in values.