AR77.37-P-4175QA Remove/Install Soft Top Compartment Hydraulic Cylinder

AR77.37-P-4175QA Remove/Install Soft Top Compartment Hydraulic Cylinder












DANGER!
Risk of injury to skin or eyes from hydraulic fluid spraying out under pressure. Risk of poisoning from swallowing hydraulic fluid.
- Release the pressure in the hydraulic system completely before starting any work on the system. Wear protective clothing and safety glasses.

1 Open trunk lid
2 Remove paneling in trunk

NOTE: Remove only left side wall paneling.

3 Disconnect plug (3) from soft top compartment cover limit switch (2).
4 Unclip safety bolts (4) and pull out
5 Press foam rubber (5) from soft top compartment cover hydraulic cylinder (1) to side with assembly wedge (6)
- See Special Tools below

6 Remove bolts (8) from fuse (7).
7 Pull out bolt (8) and remove soft top compartment cover hydraulic cylinder (1) from bracket (11).
8 Unclip soft top compartment cover limit switch (2) from soft top compartment cover hydraulic cylinder (1).
9 Remove locking plate (9) from hydraulic line (10) to soft top compartment cover hydraulic cylinder (1).
10 Pull hydraulic line (10) out of soft top compartment cover hydraulic cylinder (1).

NOTE: Use plug from brake caliper vent nipple.

11 Install in reverse order
12 Check for proper function and leakage

Special Tools

Assembly Wedge - 110 589 03 59 00: