AR72.12-P-1940-02EG Prepare Triangular Window For Installation

AR72.12-P-1940-02EG Prepare Triangular Window For Installation
- with CODE (Z04) Light armoring

The gluing areas on the triangular window (1) must be absolutely free of dust and grease to prevent adhesion problems with the adhesive material when installing the window.

1. Check triangular window (1) for scratches and damage, replace if necessary.
2. Fold over protective foil on inside of triangular window (1) approx. 3 cm from screen pattern and fix in place on protective foil with adhesive tape.

Do not glue adhesive tape to protective coating on inside of triangular window (1), otherwise the protective coating can be damaged.

3. Clean adhesive areas on triangular window (1).
4. Coat adhesive areas on triangular window (1) with primer.

Allow primer to flash off for at least 10 minutes, otherwise the adhesive force of the glue is decreased.