AR54.30-P-1000-02RAU Perform Adjustments to the Control System

AR54.30-P-1000-02RAU Perform Adjustments to the Control System

Restart tire pressure monitor
1 Correct the tire pressure of all complete wheels.
2 Switch on ignition.
3 Keep pressing the system select button (S110s3) until the "Service" menu is highlighted with a bar in the multifunction display (A1p13).
- with CODE (475) Tire pressure monitor (Schrader)






Shown on model 212.002
A1p13 Multifunction display
S110s1 Scroll forward/back button
S110s3 System selection button
S110s6 Press OK n/
S111s3 Accept/terminate phone call button

4 Select "Tire pressure " with the scroll forward/back button (S110s1).
5 Press OK n/ (S110s6) press.
In the multifunction display (A1p13) the current tire pressures or the note "Tire pressure display appears after driving for a few minutes".
6 Press scroll forward/back button (S110s1).
The note "Adopt current pressures as new guideline values" is shown in the multifunction display (A1p13).
7 Press OK n/ (S110s6) press.
The note "Tire pressure monitoring active restart with OK" is shown in the multifunction display (A1p13).
After a few minutes' driving the tire pressures are displayed and monitored.
8 Switch off ignition.