Procedures

AR32.22-P-2001-04EW Modify Fastening of Electrical Line on Compressor





A Version for 212.2

2 Bracket for compressor
3 Clip with cable tie
4 Electrical connector
A9/1 AIRMATIC compressor

The attachment of the electrical line and the position of the electrical connector (4) on compressor (A9/1) for model 212.0/1 and 212.2 are of a different design.

Only the version for model 212.2 (picture A) is supplied as a replacement part.

No modifications must be carried out when fitting to model 212.2.

B Version for 212.0/1

2 Bracket for compressor
3 Clip with cable tie
4 Electrical connector
A9/1 AIRMATIC compressor

When fitting to model 212.0/1 the attachment of the electrical line and the position of the electrical connector (4) must be modified.

1 Unclip electrical connector (4) from bracket for compressor (2)
2 Unclip clip with cable tie (3) on bracket for compressor (2)
3 Fasten clip with cable tie (3) on bracket for compressor (2) (see picture B)
4 Fasten electrical connector (4) on bracket for compressor (2) (see picture B)