AR09.41-P-1311-01CD Open and Close Coupling
AR09.41-P-1311-01CDAR09.41-P-1311-01CD Open And Close Coupling
Open
1 Pull catch spring (1) at lugs in area (A) until catch spring (1) engages.
Never pull out catch springs (1) on the lugs in the area (A) too far since the catch spring (1) can lose spring preload.
2 Detach hose on component.
3 Check sealing rings, replace if necessary.
If an old version of sealing rings with recesses are installed, replace them with new version sealing rings without recesses.
Close
4 Push in lugs in area (A) of catch spring (1).
5 Slide hose onto component until catch spring (1) engages.
6 Check connection by pulling a little at the hose.