ABS/TCS - ABR Control Unit Programming/Start-Up Info.
Date: January 18, 2011Order No.: P-B-42.47/115
Group: 42
SUBJECT: MY-All, Models 207 and 212
Programming and Initial Startup of ABR Control Unit
In the past, the procedure for programming the ABR control unit was sometimes terminated during the programming routine and resulted in the control unit being irreparably damaged.
This problem is rectified by using Xentry Diagnostics version 11/2010 in combination with the add-on 12/06/2010 1673 or with Xentry Diagnostics version 01/2011.
After the add-on has been installed, initial startup of the ABR control unit (N30/4 and N30/7) can again be performed with no problem.
Furthermore, restriction of the part numbers for replacement of the ABR control unit has been lifted.