Interior - Multicontour Seat Cushion Cover Becomes Detached
Multicontour seat cushion cover becomes detachedTopic number L191.18-P-049463
Version 1
Design group 91.18 Seat covers
Date 04-29-2010
Validity Model series 204 and 207 with SA code 409 Multicontour
seat and model series 212 with SA code 409 /432 Multi-
contour seat/active multicontour seat
Reason for change Model series 212 and 207 added / Supersedes DTB P-B-
91.18/173
Complaint:
The fastening strip for the seat cushion cover becomes detached from the front of the seat cushion shell.
Cause:
Model series 204 and 212: Insufficient holding ability of the fastening strip.
Model series 207: Matting incorrectly positioned. (See picture P1040937)
Attachments
Remedy:
Model series 204 and 212:
Remove cushion (AR91.10-P-3310CW), attach clips as described in the attachment and reattach the cover exactly. It is important that the metal protrusions in the edge of the cushion shell still protrude noticeably and that the fastener clicks firmly and audibly into place.
Model series 207: Remove cushion (AR91.10-P-3310CW), remove folded matting from lip and reattach the cover exactly. The catch profile must engage with a clearly audible click.
Attachments
Symptoms
Parts
Work units
WIS-References