Interior - UV Radiation Fading Of Wood Trim
Fading of wood trim in model series 212Topic number L168.30-P-053962
Version 2
Design group 68.30 Coverings, trim
Date 03-14-2013
Validity Affected vehicles up to:
MODEL 212 with CODE (731) Burred walnut veneer
wood finish trim
MODEL 212 with CODE (W 60) Burred walnut veneer
designo wood trim, brown
Cleanpoint August 2011
Reason for change Removed non-US specific parts due to confusion with
parts ordering.
Complaint:
Fading of the burred walnut veneer wood finish trim parts.
Cause:
UV radiation can cause fading in some cases.
Remedy:
Affected vehicles:
MODEL 212 with CODE (731) Burred walnut veneer wood finish trim
MODEL 212 with CODE (W 60) Burred walnut veneer designo wood trim, brown
Cleanpoint August 2011
Parts kits of burred walnut veneer wood finish trim are available from the GLC in the event of complaints.
In order to rule out the possibility of installing the wrong parts, check the date of manufacture on the rear of each component.
Parts kits with parts earlier than cleanpoint August 2011 should be returned to GLC. Encode the affected component with damage type
Symptoms
Parts
Work units