FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.
Home >> Mercedes Benz >> 2011 >> E 350 BLUETEC (212.024) V6-3.0L DSL Turbo (642.850) >> Repair and Diagnosis >> Accessories and Optional Equipment >> Cellular Phone >> Description and Operation >> GF82.70-P-0007-07FLJ Mobile Phone System, Operating Instructions

GF82.70-P-0007-07FLJ Mobile Phone System, Operating Instructions



GF82.70-P-0007-07FLJ Mobile Phone System, Operating Instructions
- with CODE (527) COMAND APS with single DVD drive (with navigation)
- with CODE (498) Japan version

General
The following are described in this document:
^ Mobile phone system operation up to 31.5.2010
^ Mobile phone system operation as of 1.6.2010
^ Additional Bluetooth(R) information

Mobile phone system operation up to 31.5.2010
These operating instructions consist of the following subfunctions:
^ Establish telephone connection - make a call (up to 31.5.2010)
^ Establish telephone connection - receive a call (up to 31.5.2010)
^ Hands-free mode (up to 31.5.2010)
^ "Private mode" (up to 31.5.2010)
^ Ending, aborting, or rejecting a call (up to 31.5.2010)
^ Toggling (up to 31.5.2010)

The system is described using a mobile phone connected to the Japan adapter cable electrical connector (X39/46) as an example. Deviations from this are indicated with the symbol.

A Bluetooth-compatible mobile phone can only be operated in the vehicle if a mobile phone is not connected to the adapter cable electrical connector.

With a mobile phone operated via Bluetooth(R), read access to the phonebook of the mobile phone is possible if the mobile phone supports the Bluetooth(R) Phonebook Access Profile PBAP).
More information is available at:
http://www.mercedes-benz.com/connect

Establish telephone connection - make a call (up to 31.5.2010)
The following different ways of making a telephone call are available to the user: The telephone number can be selected from various lists and dialed automatically, however, the telephone number can also be entered manually with the telephone keypad of the COMAND controller unit (A40/3) or with the buttons on the mobile phone. The Establish telephone connection - make a call description is comprised as follows:
^ Dialing using buttons on the mobile phone
^ Dialing using the left multifunction steering wheel button group (S110) and the right multifunction steering wheel button group (S111)
^ Dialing over voice control with the voice control system (VCS)
^ Dialing using the Human-Machine Interface (HMI)

Dialing using buttons on the mobile phone
If dialing is accomplished with the buttons on the mobile phone, the telephone call is established in hands-free mode.

With a mobile phone operated via Bluetooth(R), the phone call is established in "Private mode" if the mobile phone supports Private mode" and "Private mode" is activated.

Dialing via the left multifunction steering wheel button group and the right multifunction steering wheel button group
The address book of the COMAND controller unit or the phone book of the mobile phone is selected by pressing the System selection button (S110s3) via the selection menu in the multifunction display (A1p13) of the instrument cluster (A1). The name of the person to be called is selected by scrolling forward and back in the address book of the COMAND controller unit or the phone book of the mobile phone using the scroll forward and back button (S110s1). The accept/terminate phone call button (S111s3) can be used to establish the telephone call in the handsfree system.

Dialing with voice control in the voice control system (VCS)
Pressing the voice control system ON button (S111s4) of the right multifunction steering wheel button group activates the voice control of the voice control system. An acoustic signal is emitted after activation has taken place.

See "Linguatronic operating instructions" for control.

Dialing via the HMI
The telephone function of the HMI is selected using the "Telephone (TEL)" base function via the "TEL" function key at the COMAND controller unit or the "TEL" menu item in the application bar on the Audio/COMAND display (A40/8) via the Audio/COMAND control panel (A40/9).
The following ways of dialing a telephone number are available to the user here:
- Enter telephone number using available speller
- Search for the telephone number using the "Address book" menu entry in the address book
- Search for the telephone number using the "Call lists" menu entry in the call lists

The name of the person who you wish to call can be selected in the address book and the call lists by scrolling up and down. The call is activated with the "SEND" function or by pressing the "Accept phone call" button.

Establish telephone connection - receive a call (up to 31.5.2010)
The mobile phone receives a call signal via the multifunction antenna (A28/11). The calling party is indicated on the mobile phone display and at the same time this information is transferred to the COMAND controller unit via the communications control unit (N123/6).
The caller identification is shown by the COMAND controller unit via the Audio/COMAND display.

Additionally, the caller identification is shown on the display of the mobile phone and on the multifunction display of the instrument cluster.
The phone call can be accepted, e.g. via the "Accept phone call" button on the COMAND controller unit or via the Audio/COMAND control panel.

Hands-free mode (up to 31.5.2010)
Accepting a call by:
- Pressing the accept/terminate phone call button
- Pressing the "Accept phone call" button on the mobile phone
- Pressing the "Accept phone call" button on the COMAND controller unit
- Selecting the relevant option using the Audio/COMAND control panel

The hands-free system is active as a standard feature when a telephone connection is established.
Voice input is made via the handsfree microphone (A67b1). The hands-free system microphone is connected directly to the COMAND controller unit. Voice output takes place over the speaker system installed in the vehicle.

Private mode" (up to 31.5.2010)
When in "Private mode", the user can make a telephone call without other vehicle occupants being able to hear the conversation. This is achieved by separating the mobile phone from the mobile phone adapter cable during a telephone call in the hands-free mode and therefore separating it from the communications control unit. The phone call is retained and can be continued on the mobile phone.
It is also possible to continue an existing phone call in handsfree mode by inserting the mobile phone back into the cradle.

With a mobile phone operated via Bluetooth(R), the phone call is completed in "Private mode" if the mobile phone supports "Private mode" and "Private mode" is activated.

Ending, aborting, or rejecting a call (up to 31.5.2010)
The user can terminate the telephone call or reject an incoming call at any time. The user has the following options for terminating or rejecting the connection:
- Pressing the "END" button on the COMAND controller unit: While ringing:
- Press the "END" function key once to hold the call
- Press the "END" function key twice to reject the call

During an active call:
- Press the "END" function key once to end the call
- Pressing the accept/terminate phone call button
- Select the "END" function in the "Telephone (TEL)" base function via the Audio/COMAND control panel
- Press the "END" button on the mobile phone

The mobile phone then ends the connection.

Toggling (up to 31.5.2010)
The user can switch back and forth between telephone calls with 2 people. While the user talks to one person on the line, the connection to the other is put on hold. However, voice transmission is interrupted.
If another call is incoming during a telephone call, this is shown via the Audio/COMAND display. The telephone call can then be accepted or rejected.

If the incoming call is accepted, it becomes active in hands-free mode and the call in progress is put on hold.
Pressing the "END" function key terminates the call that is in progress and accepts the incoming call.
If the incoming call is rejected, the call in progress is retained in hands-free mode.
You can switch between 2 existing telephone calls using the "SEND" function key on the COMAND controller unit or the accept/ terminate phone call button.

Mobile phone system operation as of 1.6.2010
These operating instructions consist of the following subfunctions:
^ Establish telephone connection - make a call (as of 1.6.2010)
^ Establish telephone connection - receive a call (as of 1.6.2010)
^ Hands-free mode (as of 1.6.2010)
^ "Private mode" (as of 1.6.2010)
^ Ending, aborting or rejecting a call (as of 1.6.2010)
^ Toggling (as of 1.6.2010)

Establish telephone connection - make a call (as of 1.6.2010)
The following different ways of making a telephone call are available to the user: The telephone number can be selected from various lists and dialed automatically, but the telephone number can also be entered manually with the telephone keypad of the COMAND controller unit or with the buttons on the mobile phone. The following options for establishing a telephone connection are described in more detail:
^ Dialing using buttons on the mobile phone
^ Dialing via the left multifunction steering wheel button group and the right multifunction steering wheel button group
^ Dialing with voice control in the voice control system (VCS)
^ Dialing via the HMI

Dialing using buttons on the mobile phone
If dialing is accomplished with the buttons on the mobile phone, the telephone call is established in hands-free mode.

If the mobile phone supports "Private mode" and "Private mode" is activated, the phone call is established in "Private mode". In this case, the telephone must be switched to "hands-free" so that phone calls can be established in hands-free mode.

Dialing via the left multifunction steering wheel button group and the right multifunction steering wheel button group
The address book of the COMAND controller unit or the phone book of the mobile phone is selected by pressing the System selection button via the selection menu in the multifunction display of the instrument cluster. The name of the person to be called is selected by scrolling forward and back in the address book of the COMAND controller unit or the phone book of the mobile phone using the scroll forward and back button. The accept/terminate phone call button can be used to establish the telephone call in hands-free mode.

Dialing with voice control in the voice control system (VCS)
Pressing the voice control system ON button of the right multifunction steering wheel button group activates the voice control of the VCS [SBS]. An acoustic signal is emitted after activation has taken place.

See "Linguatronic operating instructions" for control.

Dialing via the HMI
The telephone function of the HMI is selected using the "Telephone (TEL)" base function via the "TEL" function key at the COMAND controller unit or the "TEL" menu item in the application bar on the Audio/COMAND display via the Audio/COMAND control pane The following ways of dialing a telephone number are available to the user here:
- Enter telephone number using available speller
- Search for the telephone number using the "Address book" menu entry in the address book
- Search for the telephone number using the "Call lists" menu entry in the call lists

The name of the person who you wish to call can be selected in the address book and the call lists by scrolling up and down. The call is activated with the "SEND" function or by pressing the "Accept phone call" button.

Establish telephone connection - receive a call (as of 1.6.2010) The incoming call is shown on the display of the mobile phone, by the COMAND controller unit via the Audio/COMAND display and on the multifunction display of the instrument cluster. The phone call can be accepted, e.g. via the "Accept phone call" button of the COMAND controller unit or via the Audio/COMAND control panel.

Hands-free mode (as of 1.6.2010)
Accepting a call by:
- Pressing the accept/terminate phone call button
- Pressing the "Accept phone call" button on the mobile phone
- Pressing the "Accept phone call" button on the COMAND controller unit
- Selecting the relevant option using the Audio/COMAND control panel

The hands-free system is active as a standard feature when a telephone connection is established. Voice input takes place via the hands-free system microphone. The hands-free system microphone is connected directly to the COMAND controller unit. Voice output takes place over the speaker system installed in the vehicle.

"Private mode" (as of 1.6.2010)
When in "Private mode", the user can make a telephone call without other vehicle occupants being able to hear the conversation. When dialing using the buttons on the mobile phone, the telephone call is carried out in "Private Mode" if the mobile phone supports "Private Mode" and "Private Mode" has been activated.
After a telephone call has been accepted or established in handsfree mode, you can switch to "Private mode" by activating "Private mode" via the mobile phone or the COMAND controller unit if the mobile phone supports "Private mode".

Ending, aborting or rejecting a call (as of 1.6.2010)
The user can terminate the telephone call or reject an incoming call at any time.

The user has the following options for terminating or rejecting the connection:
- Pressing the "END" function key on the COMAND controller unit:
While ringing:
- Press the "END" function key once to hold the call
- Press the "END" function key twice to reject the call

During an active call:
- Press the "END" function key once to end the call
- Pressing the accept/terminate phone call button
- Select the "END" function in the "Telephone (TEL)" base function via the Audio/COMAND control panel
- Press the "END" button on the mobile phone

The mobile phone then ends the connection.

Toggling (as of 1.6.2010)
The user can switch back and forth between telephone calls with 2 people. While the user talks to one person on the line, the connection to the other is put on hold. However, voice transmission is interrupted.
If another call is incoming during a telephone call, this is shown via the Audio/COMAND display. The telephone call can then be accepted or rejected.

If the incoming call is accepted, it becomes active in hands-free mode and the call in progress is put on hold.
Pressing the "END" function key terminates the call that is in progress and accepts the incoming call.
If the incoming call is rejected, the call in progress is retained in hands-free mode.
You can switch between 2 existing telephone calls using the "SEND" function key on the COMAND controller unit or the accept/ terminate phone call button.

Additional Bluetooth(R) information
For simple and fast integration of a mobile phone into the vehicle, the COMAND controller unit supports the Bluetooth(R) standardized network technology. Bluetooth(R) is a worldwide open standard for connecting Bluetooth(R) devices (e.g. mobile phone) wirelessly and is based on radio technology in the 2.4 GHz range. One advantage of Bluetooth(R), in addition to the wide availability of Bluetooth(R) devices, is the uncomplicated and spontaneous connection of Bluetooth(R) devices to a Bluetooth(R) network (ad-hoc network). The high data security (128-bit encoding) and the limited radius (approx. 10 m) of such a Bluetooth(R) network is what makes the use of Bluetooth(R) in the vehicle interesting.

The COMAND controller unit can integrate the latest-generation mobile phones via the Bluetooth(R) interface of the mobile phone and the Bluetooth antenna (A2/91) into the vehicle hierarchy. If a mobile phone is not authorized with the COMAND controller unit via Bluetooth(R), then a search can be performed for Bluetooth compatible devices via the Audio/COMAND control panel and the Audio/COMAND display. If Bluetooth(R) devices were found, the user is notified of all the Bluetooth(R) devices listed in terms of trustworthiness ("trust" or "untrust"). The user can then authorize available Bluetooth(R) devices (log on), interrupt connections to trustworthy Bluetooth(R) devices or deauthorize Bluetooth(R) devices.
pro multis Credits:Operation CHARM About Operation CHARM