U160E

The control unit has an internal hardware fault.

Test 1: Replace control module N118 (Fuel pump control module).

Test 2: Possible cause:

- Replace control module N118 (Fuel pump control module).
Affected functions:

- Engine diagnosis
- Fuel system

1. Replace control module N118 (Fuel pump control module).
When exchanging component N118 (Fuel pump control module) and returning for investigation, the control unit log must be enclosed.Remove old control unit and install new control unit.After replacing control unit N118 (Fuel pump control module), perform initial startup.







2. No further information available.