EU113B31

Communication with the DIRECT SELECT lever has a malfunction. The signal is not present.

Test 1: Check the CAN communication with control unit N80 (Steering column module).

Test 2: Chassis CAN test

Test 3: Possible cause:

- Check the CAN communication with control unit N80 (Steering column module).
- Chassis CAN bus
Affected functions:

- CAN Communication
- Drive position selection

1. Check the CAN communication with control unit N80 (Steering column module).
Warning!Communication with ECU required.


2. Chassis CAN test
Warning!Communication with ECU required.

3. No further information available.