EU016887

Communication with the electronic ignition lock has a malfunction. The message is missing.


Possible cause:

- Check the CAN communication with control unit N73 (EIS [EZS] control unit).
- Chassis CAN bus
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N73 (EIS [EZS] control unit).

Test 2: Chassis CAN test

1. Check the CAN communication with control unit N73 (EIS [EZS] control unit).
Warning!Communication with ECU required.


2. Chassis CAN test
Warning!Communication with ECU required.