EU014668

Communication with the central gateway has a malfunction. There is incomplete information.


Possible cause:

- N93 (Central gateway control unit)
Affected functions:

- CAN Communication
- Drive position selection

-------------------------------------------------

Test 1: Check the CAN communication with control unit N93 (Central gateway control unit).

Test 2: Fault in CAN communication with control unit N93 (Central gateway control unit).

1. Check the CAN communication with control unit N93 (Central gateway control unit).
Warning!Communication with ECU required.


2. Fault in CAN communication with control unit N93 (Central gateway control unit).
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module A80 (Intelligent servo module for DIRECT SELECT) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N93 (Central gateway control unit)
Possible measures

- Read out fault memory of control unit N93 (Central gateway control unit).
- Process displayed fault codes in control module N93 (Central gateway control unit).
End of test