14E900

The heater for oxygen sensor 1 (cylinder bank 1) has an electrical fault.


Possible cause:

- G3/2 (Oxygen sensor upstream of catalytic converter)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Check component G3/2 (O2 sensor upstream of KAT).

1. Check component G3/2 (O2 sensor upstream of KAT).
Possible cause and remedy

- Replace component G3/2 (O2 sensor upstream of KAT).
- After replacing component G3/2 (O2 sensor upstream of KAT), the teach-in process for this component must be performed via menu 'Control unit adaptations'.
- Erase fault memory.
End of test