145F00

The negative control deviation during throttle valve control is too high.


Possible cause:

- M16/6 (Throttle valve actuator)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Check component M16/6 (Throttle valve actuator).

Test 2: Check component M16/6 (Throttle valve actuator) for unobstructed movement.

1. Check component M16/6 (Throttle valve actuator).
Check component M16/6 (Throttle valve actuator) by means of actuation.
Figure legend

- M16/6 (Throttle valve actuator)
- B5/1 (Charge pressure sensor)
- The muffler was removed from the picture to improve the view.
Test prerequisite

- Check connector on component M16/6 (Throttle valve actuator) for correct seating, contact and latching.
- Operate engine at idling speed.
Communication with ECU required







2. Check component M16/6 (Throttle valve actuator) for unobstructed movement.
Figure legend

- M16/6 (Throttle valve actuator)
- B5/1 (Boost pressure sensor)
Possible cause and remedy

- Expose component M16/6 (Throttle valve actuator).
- Check component M16/6 (Throttle valve actuator) for unobstructed movement.
End of test