142B00

The ash content of the diesel particulate filter is too high.


Possible cause:

- Diesel particulate filter
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Check component Diesel particulate filter.

1. Check component Diesel particulate filter.
Important note:Should regeneration be performed due to oil loss (e.g. in turbocharger) or is oil present in the exhaust system?Note:Any oil present in the exhaust system burns due to the increased temperatures during diesel particulate filter regeneration. This can cause heavy smoke formation.If an oil loss is known of, regeneration may not be started manually.

YES
Replacement of component Diesel particulate filter
Important note:Burnt oil can hinder visibility for the following traffic.For this reason, regeneration of the diesel particulate filter may not be performed.Further procedure

- Make a printout of the following screen page.
- Replacement of component Diesel particulate filter
- Diesel particulate filter. New Initializing
End of test

NO
Special functions
Please enter the password:

1. No further information available.