141C00

Control module has an internal error.


Possible cause:

- N3/9 (CDI control unit)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Internal fault N3/9 (CDI control unit)

1. Internal fault N3/9 (CDI control unit)
Possible cause and remedy

- Erase fault memory in control unit N3/9 (CDI control unit)
- Switch off ignition.
- Await run-on time.
- Turn on ignition.
- Reread fault memory of control unit N3/9 (CDI control unit).
If fault occurs once again, replace control unit N3/9 (CDI control unit).End of test