13D200

The resistance of the glow plug at cylinder R9/1 (Cylinder 1 glow plug) is outside the permissible range.


Possible cause:

- R9/1 (Cylinder 1 glow plug)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Check component R9 (Glow plugs).

1. Check component R9 (Glow plugs).
Check glow plug at cylinder 1.
Warning!Important note

- This vehicle has a quick start preheating system with 7 V glow plugs.
- The glow plugs must never be energized by the vehicle electrical system voltage as this will destroy them.
Important note

- If fault codes concerning several glow plugs occur simultaneously, first check threaded connection 'W11 (Ground point (engine))' on engine wiring harness for component N14/3 (Glow time output stage) for correct seating and tightening torque (8.5 Nm), and correct if necessary.
Communication with ECU required