13C300

Minimum actuation duration for zero quantity calibration for injector of cylinder 5 not reached


Possible cause:

- Y76/5 (Fuel injector cylinder 5)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Replace defective injector.

1. Replace defective injector.
Component Y76y5 (Fuel injector cylinder 5) is defective.
Tests conducted

- Compression test
Possible cause and remedy

- Replace component Y76y5 (Fuel injector cylinder 5).
Important notes

- Make a printout of the following screen page.
- An injector injection quantity adjustment must be performed after every injector replacement.
Communication with ECU required