13C200

Minimum actuation duration for zero quantity calibration for injector of cylinder 2 not reached


Possible cause:

- Y76/2 (Cylinder 2 fuel injector)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Replace defective injector.

1. Replace defective injector.
Component Y76y2 (Fuel injector cylinder 2) is defective.
Tests conducted

- Compression test
Possible cause and remedy

- Replace component Y76y2 (Fuel injector cylinder 2).
Important notes

- Make a printout of the following screen page.
- An injector injection quantity adjustment must be performed after every injector replacement.
Communication with ECU required