120E00

The signal voltage of component Y77/1 (Boost pressure regulator) is too high.


Possible cause:

- Y77/1 (Charge pressure positioner)
Affected functions:

- Power generation

-------------------------------------------------

Test 1: Check component Y77/1 (Charge pressure positioner).

1. Check component Y77/1 (Charge pressure positioner).
Possible cause and remedy in the case of current fault code

- Check line from component N3/9 (CDI control unit) (pin M.94) to component Y77/1 (Charge pressure positioner) (pin 4) for short circuit to positive.
Possible cause and remedy in the case of stored fault code

- Inspect wiring and connectors at connection points for loose contacts, corrosion, damage and short circuits. Repair or replace as required.
End of test