AR67.10-P-1000-01TS Cut Windshield Out With Cutting Blade

AR67.10-P-1000-01TS Cut Windshield Out With Cutting Blade
- with CODE (Z04) Light armoring







1. Tape surface zones on windshield cutout on front edge of roof and left and right A-pillar with adhesive tape (2).
Attach adhesive tape (2) to prevent paint damage.

2. Remove apex seal on windshield (1) at top to front edge of roof with suitable tool

3. Cut adhesive bead and support bead on windshield (1) with window removal tool (area B).
Window removal tool, see GOTIS
http://gotis.aftersales.mercedes-benz.com
Cutting blade, L-shape, cutting length 25.4 mm
Order no.:6 39 03 207 01 2, www.fein.com

4. Cut through adhesive seam on windshield (1) in connection areas on left and right A-pillar and front edge of roof with window removal unit (area A).
Window removal tool, see GOTIS
http://gotis.aftersales.mercedes-benz.com
Cutting blade, L-shape, cutting length 19 mm
Order no.:6 39 03 208 01 0, www.fein.com

To prevent damaging the lower area of the A-pillar, interrupt cutting procedure, remove cutting blade from window removal tool, turn window removal tool 180° and reclamp cutting blade. Then continue cutting operation.







Position rag (4) between windshield (1) and engine hood to protect engine hood.

5. Position suction lifting device (3) in upper third of windshield (1) and lift windshield (1) away from body flange.
Cup suction tool, suction lifting device, see GOTIS
http://gotis.aftersales.mercedes-benz.com

Aid of a helper is required for guiding the windshield (1), otherwise adjacent body parts and the windshield (1) can be damaged.
During accident repair, check whether a new windshield must be installed.
Detach windshield (1) from body flange in upper area first, then lift out upward.