AH67.20-P-2000-01T Notes on Remove/Install Rear Window

AH67.20-P-2000-01T Notes on Remove/Install Rear Window
Model 166, 169, 170, 171, 197.3, 202, 203, 204, 207, 209, 210, 211.0/2, 212, 216.3, 218, 219, 221.0/1, 230.4, 240, 245.2, 246

^ Mask areas around rear window with suitable textile adhesive tape to prevent damaging the vehicle paintwork when cutting out.
^ Allow primer to air dry for 10 min. to avoid negative effects to the bonding action of the adhesive material.
^ Model 203.0/2: Cut silicon semiconductors for ground connection and replace when installing. Use new clips when installing water deflector.
^ The side window in the driver door must be opened during the curing time of the adhesive material to prevent the rear window from being pressed out by the air when the doors are closed.
^ Install rear window on body flange within 10 minutes before bonding force of adhesive material starts to decrease.