GF98.00-P-4040CW Overview of Fillers

GF98.00-P-4040CW Overview Of Fillers

Filler, Beijing plant, South Africa plant, Bremen plant:

Material:
Water-based

Processing method:
ESTA

Coat thickness:
27 microm (-3/+8 microm)

Stoving conditions:
5 min at 70 °C (water removal)
22 min at 155 °C (cross-linking)

Function:
UV block for electrophoretic immersion paint (KTL) and covering the substrate for good top coat appearance. Guarantees/enhances the good technical-mechanical properties of the overall paintwork structure.

The use of different filler colors, coordinated with the top coat color, also reduces the visibility/conspicuousness of stone marks.

Filler colors:
Beijing plant: anthracite, silver gray
South Africa plant: anthracite, silver gray
Bremen plant: anthracite, silver gray and optionally white or red

Filler, Sindelfingen plant

Material:
Water-based

Processing method:
ESTA (electrostatic high-speed rotation atomization)

Coat thickness:
27 microm (-3/+8 microm)

Stoving conditions:
5 min at 70 °C (water removal)
10 min at 150 °C (cross-linking)

Function:
UV block for electrophoretic immersion paint (KTL) and covering the substrate for good top coat appearance. Guarantees/enhances the good technical-mechanical properties of the overall paintwork structure.

Use of different filler colors (anthracite, silver gray and optionally white), coordinated with the top coat color, further reduces the visibility/conspicuousness of stone marks.