AR35.20-P-0130-07TX Pull Rear Axle Shaft Flange Into Angular Contact Ball Bearing

AR35.20-P-0130-07TX Pull rear axle shaft flange into angular contact ball bearing
- except CODE (P99) Special model "AMG Black Series" [model 230]

Special Tools:

Component Identification:

1 Screw insertion tool (04) onto the rear axle shaft (1).

Component Identification:

2 Push rear axle shaft flange (2) onto rear axle shaft (1).

Component Identification:

3 Position the extraction and insertion tool 01) on the rear axle shaft flange (2), in the process screwing the spindle (03) onto the insertion tool (04).
4 Mount the extraction and insertion tool (01) on the rear axle shaft flange (2) using three wheel bolts.
5 Draw in the rear axle shaft flange (2) up to the stop in the angular contact ball bearing (3); to do this, turn the nut (02) and counterhold the spindle (03).