AR40.30-P-0402-02T Carry Out Distance and Comparative Measurements on Rear Axle

AR40.30-P-0402-02T Carry out distance and comparative measurements on rear axle

Modification Notes:

Test Values For Distance And Comparative Measurements On Rear Axle:

Special Tools:

The measuring set is designed in such a way, that the measuring bolts, according to the measuring points at the vehicle, can be screwed together out of mounting bolts, extensions and measuring tips/bolts.

The configuration of the measuring bolts is shown in the table, where the digits in the column headed "Measuring bolt configuration" are the special tool end numbers.

For example: 02/07/10=
168 589 07 63 02 (support stud)
168 589 07 63 07 (extension)
168 589 07 63 10 (measuring tip)

Component Identification:

1 Measure comparative measurement (H2) from check point (K) to centering point of the Torx bolt head of the front mount of the rear axle carrier, left to right.

If necessary, unscrew and screw in torx bolt and check for bending.

Shows on model 211

Component Identification:

2 comparative measurement (H5) from check point (K) to the centering point of the Torx bolt head of the rear mount of the rear axle carrier, left to right.

Unscrew and screw in Torx bolts if necessary and check for bending.

Shows on model 211

Component Identification:

3 Measure distance dimension (H6) from the centering point of the Torx bolt heads between the front bearings of the rear axle carrier.

Shows on model 211

Component Identification:

4 Measure distance dimension (H7) from the centering point of the Torx bolt heads between the rear bearings of the rear axle carrier.

Shows on model 211

Component Identification:

5 Measure comparative measurement (H9) diagonally from the centering point of the Torx bolt heads between the front and rear mount of the rear axle carrier, left to right.

Shown on model 211