Cruise Control Switch: Description and Operation

GF30.20-P-2100Q CC [TPM] Switch, Component Description
- ENGINE 642 in MODEL 209.3 /4, 211.0 /2 /6, 219.3





Shown on model 211 except Code (494) USA version
1 Resume from memory
2 Decelerate and set
3 Accelerate and set
4 Switch off
5 Control contact
S40/4 CC [TPM] switch
S40/4v1 Yellow LED, variable speed limiter

Location
The CC [TPM] pushbutton switch is located at the top left of the steering column module (N80).

Task on vehicles except Code (494) USA version
The CC [TPM] switch switches the cruise control functions and the variable speed limiter on or off.

Task on vehicles with Code (494) USA version
The CC [TPM] switch switches the cruise control functions on or off.

Function
Two switching contacts are always activated simultaneously when the cruise control switch is operated. The actual input takes place by closing one of the switching contacts (storing the speed). The safety contact must close simultaneously so that the input is accepted. The switch signals are detected by the steering column module and transmitted to a Control Area Network (databus/CAN Bus) (CAN).