AR77.21-P-0600-03T Apply Adhesive Material For Rear Glass Roof

AR77.21-P-0600-03T Apply Adhesive Material For Rear Glass Roof
- with CODE (413) Panoramic sliding roof
- with CODE (419) Solar module for panoramic roof

Modification notes:

Repair Materials:

Wear cotton gloves. Ensure that no fingerprints are present in the area of the adhesive surface.

1. Cut triangular opening of application nozzle so that adhesive can be applied with a height of approx. 14 mm and a width of approx. 8 mm.
2. Guide application nozzle along adhesive surface on flange while uniformly pressing out adhesive.

Immediately remove contamination caused by the adhesive. Completely remove excess adhesive from cartridges immediately after applying adhesive and dispose of it as per local regulations.