AR77.21-P-0800T Remove/Install Panoramic Roof Frame

AR77.21-P-0800T Remove/Install Panoramic Roof Frame
- with CODE (413) Panoramic sliding roof
- with CODE (419) Solar module for panoramic roof







1 Open side window in driver and passenger door
2 Remove left and right front seats
3 Remove panoramic roof drive
4 Remove panoramic roof wind deflector
5 Remove water deflector of panoramic roof
6 Cover floor covering and center console to prevent them from becoming dirty
7 Tape roof paneling (6) on left and right side of vehicle with adhesive tape

DANGER:
- Risk of injury from slipping when clamping the blade in the multicutter and from glass splinters when cutting out cemented windows
- Always interrupt air supply when inserting or removing blade
- Wear protective gloves and eye protection.

8 Cut out panoramic roof frame (5).

See "Special Tools - Cutting blade" given below.
See "Special Tools - Spacer blocks" given below.

See "Commercially Available Tools" given below.

9 Remove panoramic roof frame (5) from body
10 Prepare panoramic roof frame (5) for installation

See "Special Tools - Cutting blade" given below.

See "Commercially Available Tools - Multicutter" given below.
See "Commercially Available Tools - Suction cup" given below.

11 Prepare glue cartridge

See "Commercially Available Tools" given below.

12 Apply glue for panoramic roof frame (5)

NOTE: Height of glue bead approx.13 mm

See "Commercially Available Tools" given below.

13 Install panoramic roof frame (5)

Gap dimension
- Height adjustment wind deflector/front glass roof: 1 (± 1) mm
- Height adjustment front glass roof/rear glass roof: 1 (± 1) mm
- Height adjustment rear glass roof/rear window: 5 (± 1) mm
- Wind deflector/front glass roof: 1 (± 1) mm
- Rear glass roof/rear window: 5 (± 1) mm

NOTE: The curing time, calculated as of insertion of the panoramic roof frame (5), amounts to approx.1 hour.

See "Special Tools - Spacer blocks" given below.
See "Special Tools - Feeler gage" given below.

See "Commercially Available Tools - Suction cup" given below.

14 Remove adhesive tape from roof paneling (6)
15 Fold sealing lip of rear window upward to the edge of the glass roof

See "Special Tools - Long wedge" given below.

16 Install water deflector of panoramic roof

NOTE: The new panoramic roof frame is delivered with properly adjusted clips.

17 Install wind deflector of panoramic roof
18 Install panoramic roof drive
19 Remove cover from floor covering and center console
20 Install left and right front seat
21 Close side window in driver and passenger door


Special Tools

Special Tools:

Commercially Available Tools

Commercially Available Tools: