Interior - Uneven Gap Between Dash Panel and Ashtray

Date: March 11, 2008

Order No.: P-B-68.20/72

Supercedes:

Group: 68

SUBJECT:
All Model 211 Vehicles

Gap Width Between Upper Control Panel and Ashtray Housing





If you receive customer reports in the above model vehicles that the gap width between the upper control panel and the door to the ashtray is not uniform, this may be due to tolerances in the upper control panel and ashtray housing. To resolve, apply approximately 20 mm of foam material (Figure 1, arrow) to the area where gap width is not favorable.





Parts Information

Note:
The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on March 11, 2008. Please refer to Netstar --> Star --> TekInfo Star Time for the most current labor time allowance.





In Case of Warranty, use the table above.