EP2010

The braking signal sent from the traction system via the CAN bus is implausible.


Possible cause:

- N47-5 (ESP and BAS control module)
Affected functions:

- Drive position selection

-------------------------------------------------

Test 1: Interrupted or missing CAN signals from control unit N47-5 (ESP and BAS control module)

1. Interrupted or missing CAN signals from control unit N47-5 (ESP and BAS control module)
Operation number of operation texts and work units or standard texts and flat rates:27-0641WARNING

- This is not a function error of control module N15/5 (Electronic selector lever module control unit) and does not justify replacement.
Possible cause for the entry of this event code

- Operational fault of component N47-5 (ESP and BAS control module)
Possible measures

- Read out fault memory of control unit N47-5 (ESP and BAS control module).
- Process displayed fault codes in control module N47-5 (ESP and BAS control module).
End of test