Manufacturer Code Charts: 2250

[4] Check component G2 (generator).: The temperature at component G2 (generator) is too high.

Test 1: G2 (generator)

Test 2: Alternator diagnosis

1. G2 (generator)
Note on fault setting conditions

- Temperature in component G2 (generator)>150° C
Possible cause and remedy

- Test engine cooling system.
- Test air admission of component G2 (generator).
End of test

2. Alternator diagnosis
Note on fault setting conditions

- Temperature in component G2 (generator)>150° C
Possible cause and remedy

- Test engine cooling system.
- Test air admission of component G2 (generator).
End of test