AH01.45-P-0001-01TZ Notes on Application of Sealant to Oil Pan

AH01.45-P-0001-01TZ Notes on application of sealant to oil pan

Application of sealant to oil pan:

The line (A) identifies the sealant run.

The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and to a height and width of 2.0 mm (0.5 mm).

The sealant must be applied within 10 min.

The sealant bead must not be spread. Only the approved sealant may be used.