AH01.45-P-0001-01TW Notes on Application of Sealant to Oil Pan

AH01.45-P-0001-01TW Notes on application of sealant to oil pan

Sealant path for engine 272:

Sealant path for engine 272
The lines (A) identify the sealant beads.

The sealing surface must be cleaned. The sealant must only be applied to the specified surface in the form of a bead and a height and width of 2.0 mm (0.5 mm).

The sealant must be applied within 10 min.

The sealant bead must not be spread. Only the approved sealing compound may be used.

Sealant path for engine 273:

Sealant path for engine 273